Fuse is a shield for electricity

Every electrical appliance you are connected with fuse. Doesn't matter what size or current rate it's always protect your electrical device from overloads or short circuits. Why it's connect to your electrical device and appliance and why it's acting like a shield in first place. So lets find out why!!!

Fuse is a type of low resistance that conduct electricity with precise current rate according to the current rate on the fuse. If the current rate is so high,the fuse will burn,melt or explode. Kaboooooom!!!!!

When the fuse melt,it immediately disconnect current flows between then fuse and electrical device. This will safe your electrical device. Thank god this fuse sacrifice itself to safe my electrical appliance. Inside fuse has a thin wire when the high current pass through this thin wire, it will overheated and blown.For bigger fuse, there's thick low resistance conductor,when the high current pass through this thick conductor, it will explode or melt. This thick low resistance conductor fuse only works for high voltage.

Types of fuse  

This type of fuse covers with ceramic or cartridge for outer layer. Inside have thin wires according to the current rate of fuse. This fuse can find in your house electrical appliance.

Another similar covers of ceramic or cartridge is use for house and industrial main switch. you can find this in your house main switch.

This kind of fuse as the picture above shown is use for high voltage. This fuse is extremely dangers. If a short circuit or overload happen this fuse will explode and damage the protective relays.

This types of fuse can find on high powered electronic board and car electronic systems. This fuse can easy replace and can't damage the electronic boards unless if high current pass through the electronic boards.

WHEN YOU REPAIR SOME ELECTRICAL APPLIANCE DON'T FORGET TO PUT FUSE OUR YOUR ELECTRICAL DEVICE WILL KABOOOOOOM!!!