Electrical safety and precaution

In electrical,there's many accident cause to trauma,unconscious and even death. So we need safety and precaution to avoid these accident and keep you safe. There's several safety and precaution so Let' look out.

1) Don't turn on Socket or switch by your wet hand.

If you hand wet and you turn on switch or socket, the water in your wet hand will get in to the switch or socket and get electrocute and you will be unconscious. Dry your hand before turn on some electrical device

2) Always ground or earth your electrical device

Your electrical device are earth or ground. This will prevent consumer from getting electric shock. If the earth or ground fails, the consumer will get shock and the electrical device is unsafe to use

3) Don't add some many power point

Your sockets carries certain amount of current. If you add so many plug and other electrical application,the fuse in socket will blow. This will harm to consumer and the house wiring.

4) Insulate or replace damage wires.

Wires are common in damage by natural,mechanical or chemical. If you insulate or replace the wire,your wiring and electrical device will be safe to use. if didn't, it can cause some serious electrical fault.

5) Always get permission from professionals.

If you are learning or pre electrican, whatever electrical project you done,always ask permission from professionals to test the project. If you didn't ask for permission, you at risk from getting accident.

6) Clean your workplace after project or wiring done

After you done some wiring, you should always clean the workplace to make sure everything is secure from prevent happening accident. Most of the accident cause by unclean workplace. Make sure clean it for your and others safety.

7) Keeps your tools after used

Tools are so useful. But sometimes it's bad when you didn't take care well. Keep the tools that you already use. When the tools is all over the place even you are not using it may cause serious injuries to workers and others or even death.